天平砝码检定误差原因分析及改进措施

【摘要】天平砝码是常用的计量标准装置之一，用于检定和校准各类称重设备。在天平砝码检定过程中，经常会出现误差，影响着测量结果的准确性和可靠性。本文深入分析了天平砝码检定误差产生的原因，并提出相应的改进措施，以期有效改善天平砝码的检定精度。

【关键词】计量检定；天平砝码；误差

【DOI编码】10.3969/j.issn.1674-4977.2024.01.063

Analysis and Improvement Measures for the Errors in the Calibration of Balance Weights

YAO Jixiong

（Loudi Metrological Testing and Verification Institute， Loudi 417000， China）

Abstract： The balance weight is one of the commonly used metrological standard devices for verifying and calibrating various weighing equipment. However， errors often occur during the calibration process of balance weights， which affects the accuracy and reliability of measurement results. This article deeply analyzes the reasons for the calibration errors of balance weights and proposes corresponding measures to effectively improve the calibration accuracy.

Keywords： metrological verification； balance weight； error

在科学实验、工业生产以及商品交易等领域，准确的测量结果是保证产品质量、判断实验结论和维护公平交易的基础。（剩余4494字）