系统间电磁兼容性分析仿真效率探讨

  • 打印
  • 收藏
收藏成功


打开文本图片集

摘要:文章通过采用Matlab和C++语言对ITU-R P.2108传播模型两种场景的模拟仿真实现,统计对比不同仿真循环次数所用的时间,结果表明C++语言在实现EMC仿真过程中确实能够提高运行效率,节省仿真时间,最后总结了C++在仿真过程中遇到的问题以及解决方案。

关键词:Matlab;C++;EMC

doi:10.3969/J.ISSN.1672-7274.2022.05.003

中图分类号:TP 39                        文献标示码:A                        文章编码:1672-7274(2022)05-000-03

Discussion on Simulation Efficiency of  Inter-system EMC Analysis

LI Jianping, WANG Tan, LIU Yanjie

(Shaanxi Radio Monitoring Station, State Radio Monitoring Center, Xi’an 712000,China)

Abstract:In this paper, Matlab and C++ language are used to simulate the two scenarios of the ITU-R P.2108 propagation model, and the time used for different simulation cycles is compared. The results show that C++ language can indeed improve the operation efficiency in EMC simulation. At the end of the article, it summarize the problems and solutions encountered by C++ in the simulation process.

Key words:Matlab; C++; EMC

作者简介:李建平(1988-),男,硕士,国家无线电监测中心陕西监测站工程师,主要从事无线电监测相关技术的研究。(剩余3570字)

目录
monitor
客服机器人