电化学氧化法去除废水中有机氮：反应条件和过程优化

打开文本图片集

中图分类号：0646.51 文献标志码：A DOI：10.3969/j.issn.1003-9015.2025.03.017

Abstract： In order to reduce environmental impact of the organic pollutant N N -dimethylformamide（DMF）emitted byindustrial production，anelectrochemical oxidation method wasemployedforDMFdegradation.Theeffects of four independent factors （current density，pad spacing，pH and initial chloride ion concentration）on DMF degradation were investigated bysingle-factor experiments.The optimal experimental conditions were as follows：the current density was 40mA⋅cm-2 ，the pH was 6，the pad spacing was 2 cm，and the initial chloride mass concentration was 2.34g⋅L-1 .Flow electrolysis was used to optimize and improve the device，and the specific effects of various parameters on the DMFremoval rate were investigated.The results indicate thatthe reaction rate significantly improves with increasing flowcirculation times.When the circulation reaches 3O times，theremoval eficiency of DMF ultimately achieves 93.68% ：

Key words：DMF； electrochemical oxidation； 2D electrode system； flow electrolysis

1前言

人造有机化学品造成的水污染是水资源短缺的一个重要原因[1]。（剩余11248字）