重卡驾驶室前风窗胶粘工艺的胶型设计和失效分析

打开文本图片集

关键词：前风窗；胶粘剂；装配；工艺

中图分类号：U463 DOI ：10.20042/j.cnki.1009-4903.2024.06.013

Process Design and Failure Analysis of Cab Windshield Adhesive

Abstract：There are two types of adhesive structures for the front windshield of heavy trucks： one is adhesive strip connection， and theother is adhesive glue bonding. At present， the front windshield glass assembly of domestic heavy trucks is mostly selected for adhesivetechnology. The adhesive technology enhances the overall body strength and stress distribution is uniform， which can realize automationoperation and improve production efficiency; it has impact resistance. The adhesive technology improves the body’s sound insulationeffect and enhances product quality. However， the realization of adhesive technology requires high requirements for on-site equipment，personnel， and operation， and a slight mistake in operation may cause the cab to leak. This paper mainly introduces the design of theautomatic gluing process and the potential failure reasons of the adhesive process.

Key words： Windshield；Adhesive；Assembly；Process

0引言

驾驶室前风窗胶粘工艺在汽车制造领域普遍应用。（剩余3750字）