智能冷暖杯托工作状态自动调节控制策略研究

打开文本图片集

【摘  要】本文主要针对某款车型智能冷暖杯托工作状态自动调节的控制策略进行研究。在激活智能冷暖杯托实体开关后，通过判断杯托内水杯的有无及环境温度的高低，对杯托的工作状态进行自动调节，以保证水杯中液体能够一直处在合适的温度内，同时可避免杯托长时间空载运行。

【关键词】汽车电子；智能冷暖杯托；自动调节；控制方法

中图分类号：U463.6    文献标志码：A    文章编号：1003-8639（ 2022 ）12-0053-03

Research on Automatic Adjustment Control Strategy of Working State of Intelligent Thermal Cup Holder

LAI Rui-fu，XU Zi-run，ZHOU Ming-jie，CHEN Wen-qing，REN Qiang，HOU Li-heng

（Automotive Engineering Research Institute of Guangzhou Automobile Group Co.，Ltd.，Guangzhou 511434，China）

【Abstract】This paper mainly studies the control strategy of automatic adjustment of working state of intelligent thermal cup holder. After activating the intelligent thermal cup holder，the working state of the cup holder can be automatically adjusted through the water cup in the cup holder and the ambient temperature，so as to ensure that the water in the cup can always be at an appropriate temperature and avoid the cup holder long time running without load.

【Key words】automotive electronics；intelligent thermal cup holder；automatic adjustment；control method

随着汽车电子技术的飞速发展，人们对汽车内饰的设计和体验感的要求越来越高。（剩余3878字）