基于Moldflow的滑块零件变形优化

打开文本图片集

【摘  要】以某车型的内部结构件为研究对象，其中结构件使用结晶材料（含玻璃纤维），结合T0零件，使用Moldflow软件解析产品翘曲原因，使用预变形手段优化产品的翘曲变形，使产品变形量满足要求。

【关键词】结晶材料；玻璃纤维；翘曲；预变形

中图分类号：U463.6    文献标志码：A    文章编号：1003-8639（ 2023 ）08-0070-03

Optimization of Sliding Block Part Deformation Based on Moldflow

LIN Ying，HU Guang-liang，YAN Sheng-yi，YING Jia-hao，WEN Ying-lan

（Wenzhou Changjiang Automotive Electronics Co.，Ltd.，Wenzhou 325000，China）

【Abstract】The internal structural parts of a vehicle model were taken as the research object，in which the structural parts were made of crystalline materials（including glass-fiber），combined with T0 parts，Moldflow software was used to analyze the reasons for warping of products，and pre-deformation method was used to optimize the warping deformation of products，so that the deformation of products could meet the requirements.

【Key words】instrument panel frame；fiber orientation；warping；pre-deformation

本文以座调类开关的内置结构件为研究对象，利用Moldflow软件对含玻璃纤维材料零件翘曲变形原因进行分析、优化。（剩余3384字）