一种面向异构协议融合的 DMA 环形队列控制方法

打开文本图片集
DOI:10.19850/j.cnki.2096-4706.2026.14.017
中图分类号:TN958
文献标识码:A
文章编号:2096-4706(2026)14-0086-06
A DMA Circular Queue Control Method for Heterogeneous Protocol Integration
QI Gongxin, SHI Haifeng, HUANG Yongmeng, HE Hanchen
(Nanjing Research Institute of Electronics Technology, Nanjing 210039, China)
Abstract: To address the issues of low fragment reassembly efficiency and high CPU overhead caused by Fibre Channel (FC) sequence interleaving in massive heterogeneous integration networks with concurrent transmissions from multiple source nodes, this study proposes a sequence reassembly acceleration method based on DMA circular queue control. The method revolves around three types of command rings (read, write, and completion commands) and constructs a hardware-software interaction architecture with multi-pointer cyclic scheduling. It combines hardware-based dynamic descriptors to assign a globally unique identifier to heterogeneous data fragments, manage address offsets, and match protocol features. By integrating the efficient caching and scheduling capabilities of circular queues with the CPU-free characteristics of DMA transfers, the method accurately identifies heterogeneous protocol frames at the hardware level, thereby accelerating the reassembly process of heterogeneous sequence fragments. The proposed method effectively solves the bottlenecks of low hardware-software interaction efficiency and high CPU resource occupation, providing low-latency, high-throughput, and lightweight hardware acceleration support for heterogeneous protocol integration.
Keywords: heterogeneous protocol integration; multi-source sequence fragment reassembly; DMA controller; command ring control; dynamic descriptors
0 引言
异构协议融合是现代通信系统向高带宽、多接口、泛在互联演进的核心需求,尤其在高速存储区域网络、航空航天等领域的电子装备中,以光纤通道(Fibre Channel, FC)为主干网络并融合以太网、RapidIO、PCIe等多种协议的异构组网已成为主流架构[1-3]。(剩余11109字)